Market Research Future has Published a Cooked Research Report on the Global Release Liner Market. —
Market Research Future (MRFR)’s analysis has found out that the global release liner market is anticipated to expand at a CAGR of 4.90% during the projection period 2018 to 2023. The market’s valuation, according to the report, is poised to reach USD 98,663.8 Mn mark by 2023. The rapid developments in packaging technologies are the primary factor anticipated to boost the revenue generation in the nearby future.
Get Free Sample Request @ https://www.marketresearchfuture.com/sample_request/6241
Industry leaders are leveraging innovative and attractive packaging for gaining an edge over competitors. It has emerged as a key area of focus for the marketers. This, in turn, is likely to have a positive impact on the growth of the release liner market in the years to come. The pharmaceutical and food & beverage industries are anticipated to dictate the future trajectory of the market through the assessment period. However, on the flip side, the high cost of these release liners can pose a challenge to the market participants.
By substrate, the global release liner market has been bifurcated into paper-based and film-based. The film-based segment is currently dominating the market and is anticipated to retain its forefront position through the review period exhibiting a relatively higher CAGR.
Based on labeling technology, the release liner market has been segmented into glue applied, shrink sleeve, pressure sensitive, stretch sleeve, in-mold, and others. Among these, the glue applied segment is projected to dictate the growth trajectory closely trailed by the pressure sensitive segment in the forthcoming years.
By printing process, the global release liner market has been segmented into digital printing, flexography, offset, gravure, and screen. The flexography segment held the lion’s share of the market in 2017. However, the digital printing segment is anticipated to gain traction and expand at the highest CAGR across the projection period.
On the basis of application, the release liner market has been segmented into food & beverage, cosmetics & personal care, medical & pharmaceutical, electronics, automotive, and construction. Among these, the food & beverage segment is likely to retain the most substantial share of the market owing to high disposable income.
The players participating in the share analysis of the global release liner market and profiled in this MRFR report are 3M (U.S.), Polyplex (U.S.), Alhstorm-Munksjo (Sweden), UPM Raflatac (Finland), Gascogne Flexible Company (Norway), Avery Dennison Corporation (U.S.), Mondi (U.S.), Eastman Chemical Company (U.S.), Sappi Limited (South Africa), LINTEC CORPORATION (Japan), and Rayven Inc. (U.S.).
By region, the global release liner market has been segmented into five regions - North America, Europe, Asia Pacific, Latin America, and the Middle East & Africa (MEA). Asia Pacific held a major share of the global market accounting for 37.5% share. The regional market is likely to reach a valuation of USD 40,903.4 Mn by the end of the projection period reflecting a CAGR of 6.39%. The region is anticipated to witness an increase in the number of manufacturing plants which is likely to facilitate the expansion of the release liners market in the region over the next few years.
North America is expected to scale a CAGR of 3.79% across the review period. Meanwhile, Europe is also projected to exhibit growth potential over the next couple of years.
In May 2019, ITASA, a manufacturer of high-quality release liners, has initiated production at its latest plant in Querétaro, Mexico. The plant is expected to serve the entire continent.
In July 2018, Verso Corporation's Androscoggin Mill has introduced technological upgrades for increasing its release liner paper production capacity.
3.1 Research Process 25
3.2 Primary Research 26
3.3 Secondary Research 27
3.4 Market Size Estimation 28
3.5 Forecast Model 28
3.6 Drivers 29
3.6.1 Increasing Demand From The Food And Beverage And Construction Industries 30
3.6.2 Growing Adoption Of Digital Printing 30
3.6.3 Increasing Use Of Smart Labels In RFID 30
3.7 Restraints 31
3.7.1 Increasing Use Of Linerless Labels 31
3.8 Opportunities 31
3.8.1 Recycling Of Release Liners 31
3.8.2 Adoption Of PDMS-Based Release Liners 32
3.9 Trends 32
3.9.1 Increasing Use Of Differential Release Liners 32
Market Factor Analysis:
4.1 Supply Chain Analysis 34
4.1.1 Raw Materials 34
4.1.2 Release Liner Manufacturers 34
4.1.3 Distribution Channel 35
4.1.4 End-Use Industry 35
Access Report Details @ https://www.marketresearchfuture.com/reports/release-liner-market-6241
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Services.
MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by Components, Application, Logistics and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.
In order to stay updated with technology and work process of the industry, MRFR often plans & conducts meet with the industry experts and industrial visits for its research analyst members.
Market Research Future
Office No. 528, Amanora Chambers
Magarpatta Road, Hadapsar,
Pune - 411028
+1 646 845 9312
Name: Akash Anand
Email: Send Email
Organization: Market Research Future
Address: Market Research Future Office No. 528, Amanora Chambers Magarpatta Road, Hadapsar, Pune - 411028 Maharashtra, India
Phone: +1 646 845 9312
Release ID: 88920359