Oil Well Cementing 2019 Market Segmentation,Application,Technology & Market Analysis Research Report to 2026

WiseGuyReports.Com Publish a New Market Research Report On Oil Well Cementing 2019 Market Segmentation,Application,Technology & Market Analysis Research Report to 2026 .

Oil Well Cementing Industry 2019


The global oil well cementing market was estimated at a worth of USD 503.0 million in 2017 and is projected to grow at a CAGR of 6.3% over the forecast period. Increasing exploration and production from unconventional oil & gas reserves, rising count of matured wells, and increasing production from offshore reserves are expected to be the major driving factors for growth of oil well cement market over the forecast period.

There are several grades of these cement products, but majorly are categorized into ordinary, moderate sulfate resistant (MSR), and high sulfate resistant (HSR). On the basis of application, the global market is further segmented into onshore and offshore. Ordinary (Grade 0) also known as normal portland cement is one of the widely used type of portland cement which is the most common cement type for general use as a basic ingredient of non-specialty grout, mortar, stucco, and concrete.

Get a Free Sample Report @ https://www.wiseguyreports.com/sample-request/3695879-oil-well-cementing-market-share-size-trends-industry

For more information or any query mail at sales@wiseguyreports.com

Moderate sulfate resistant (MSR) also called type II cement is used where precaution against moderate sulphate attack is important. MSR usually generates less heat of hydration at a slower rate than cement Type I and thus, this cement is used in mass structures such as retaining walls, large piers, and heavy abutments.

MSR are preferred in hot water due to less heat generation. High sulfate resistant (HSR) type of cement is used when concrete is exposed to highly alkaline soil or water having high sulphate content. Such cement is used where soils or ground waters have a high sulfate content as HSR is not resistant to acids and/or other highly corrosive substances.
The raw material used for manufacturing oil well cement includes limestone, iron ore, coke and iron scraps. The product is manufactured from clinkers of Portland cements and also from cements that are hydraulically blended. Oil well cements are formulated for resisting high pressures and temperatures within the wellbore.

These products set slowly owing to its organic retarders which prevent it from setting too fast. It is due to all these characteristics that it is used in the building of the oil wells where the pressure is around 20,000 PSI and the temperature is around 500 degrees Fahrenheit.

The cement slurry is pumped into the wellbore through the casing and fills the space between the wellbore and casing. Cementing plug is inserted into the casing to provide sealing and removes debris from the casing. The main service providing companies include Halliburton, Schlumberger, Trican services and Baker Hughes which are the end-use segments of the oil well cement value chain.

Onshore drilling operations segment accounted for the largest market in 2017 with a share of 67.3% of oil well cementing market in 2017. Demand from offshore oil well drilling operations are anticipated to witness significant growth and account for 32.7% share of the global oil well cementing market in in 2026. Increasing exploration & production activities from offshore oil and gas reserves are expected to be driving product demand in the present industry space. However, ongoing investments in onshore matured and old wells can be considered a consistent source of product demand from the segment.

The global oil well cementing market on the basis of product, application and region:

Oil Well Cementing Product Outlook (Revenue, USD Million, Volume, Kilo Tons, 2015 2026)
Ordinary (Grade 0)
Moderate Sulfate Resistant (MSR)
High Sulfate Resistant (HSR

Oil Well Cementing Application Outlook (Revenue, USD Million, Volume, Kilo Tons, 2015 2026)
Onshore drilling operations
Oil wells
Gas wells
Offshore drilling operations
Oil wells
Gas wells

Oil Well Cementing Regional Outlook (Revenue, USD Million, Volume, Kilo Tons, 2015 2026)
North America
U. S.
Rest of Europe
Latin America
Rest of Latin America
Middle East and Africa
Saudi Arabia
South Africa
Rest of MEA

Enquiry About Report @ https://www.wiseguyreports.com/enquiry/3695879-oil-well-cementing-market-share-size-trends-industry

Table Of Contents Major Key Points

1. Overview and Scope
1.1. Research goal & scope
1.2. Research assumptions
1.3. Research Methodology
1.3.1. Primary data sources
1.3.2. Secondary data sources
1.4. Key take-away
1.5. Stakeholders

2. Executive Summary
2.1. Market Definition
2.2. Market Segmentation

3. Oil Well Cement Market Insights
3.1. Oil well cement market segmentation & scope
3.2. Oil well cement market dynamics
3.2.1. Oil well cement market driver analysis
3.2.2. Oil well cement market restraint/challenges analysis
3.2.3. Oil well cement market opportunity analysis
3.3. Oil well cement industry news
3.4. Oil well cement regulatory framework and current policies, by country
3.5. Industry value chain analysis
3.5.1. Upstream Raw Material Suppliers of Oil-Well Cement Analysis
3.5.2. Raw material procurement: Analysis
3.5.3. List of major players of oil well cement industry
3.6. Market shares of few of the leading industry participants
3.7. Major Players Product Types
3.8. Oil Well Cement Manufacturing Cost Structure Analysis
3.8.1. Production Process Analysis
3.8.2. Manufacturing Cost Structure of Oil-Well Cement
3.8.3. Raw Material Cost of Oil-Well Cement
3.9. Market Channel Analysis of Oil-Well Cement
3.10. Major Downstream Buyers of Oil-Well Cement Analysis
3.11. Oil well cement pricing analysis
3.12. Oil well cement, SWOT Analysis, by country

4. Oil well cement Market Size and Forecast, By Product (Kilo Tons; USD Million)
4.1. Key Findings
4.2. Ordinary (Grade 0)
4.3. Moderate Sulfate Resistant (MSR)
4.4. High Sulfate Resistant (HSR)

5. Oil well cement Market Size and Forecast, By Application (Kilo Tons; USD Million)
5.1. Key Findings
5.2. Onshore drilling operations
5.2.1. Oil wells
5.2.2. Gas wells
5.3. Offshore drilling operations
5.3.1. Oil wells
5.3.2. Gas wells


Buy 1-user PDF @ https://www.wiseguyreports.com/checkout?currency=one_user-USD&report_id=3695879

Wise Guy Reports is part of the Wise Guy Consultants Pvt. Ltd. and offers premium progressive statistical surveying, market research reports, analysis & forecast data for industries and governments around the globe. Wise Guy Reports features an exhaustive list of market research reports from hundreds of publishers worldwide. We boast a database spanning virtually every market category and an even more comprehensive collection of market research reports under these categories and sub-categories.

Contact Info:
Name: Norah Trent
Email: Send Email
Organization: WiseGuy Research Consultant Pvt Ltd.
Address: Office No.528,Amanora Chambers,Magarpatta Road,Hadapsar,Pune-411028.
Phone: +1-646-845-9349
Website: https://www.wiseguyreports.com

Release ID: 490691